Manufacturer and product information

This page contains manufacturer, product and safety information for the electronic components included in our hardware bundles.

Manufacturer of the hardware components

Dalian Good Display Co., Ltd. No. 18, Zhonghua West Road Ganjingzi District Dalian 116033, Liaoning China

Email: info@good-display.com Phone: +86 411 8461 9565

Responsible economic operator and EU importer

SpacePC – Jonathan Stöcklmayer Leibnitzstraße 4 72636 Frickenhausen Germany

Email: hello@spacepc.dev

SpacePC imports the hardware components listed below from a third country into the European Union and distributes them as a combined hardware bundle.

7.5-inch E-Paper display

Manufacturer: Dalian Good Display Co., Ltd. Model or part number: GDEY075Z08 Manufacturer part number: 20Z0750Z0 Product type: Three-colour E-Paper display Screen size: 7.5 inches Resolution: 800 × 480 pixels Colours: Black, white and red Interface: SPI Connector: 24-pin FPC connector, 0.5 mm pitch Operating voltage: 3.3 V Operating temperature: 0 °C to 40 °C Storage temperature: −25 °C to 70 °C Driver IC: UC8179

Safety information

Operate the display only within the specified electrical and thermal limits.

The display is sensitive to mechanical pressure, bending and electrostatic discharge. Do not press on the display surface or bend the display.

Insert or remove the flexible cable only while the connector is open.

Disconnect the power supply completely before connecting or disconnecting the display.

For use in dry indoor locations only.

E-Paper adapter board

Manufacturer: Dalian Good Display Co., Ltd. Model or part number: DESPI-C02 Manufacturer part number: 60700200 Product type: Adapter and driver board for E-Paper displays Interface: SPI Display connector: 24-pin FPC connector, 0.5 mm pitch Operating voltage: 3.3 V Dimensions: 41 × 22 mm Temperature range: −20 °C to 70 °C

Safety information

Operate the board only from a regulated 3.3 V supply.

A higher voltage may permanently damage the adapter board or connected display.

Do not operate the board on conductive surfaces. Prevent short circuits between contacts and traces.

Disconnect the power supply before changing any wiring.

For use in dry indoor locations only.

ESP32 development board

Manufacturer: Dalian Good Display Co., Ltd. Model or part number: ESP32-L Manufacturer part number: 6010000 Product type: ESP32 development and control board Microcontroller module: ESP32-WROOM-32D Wireless: Wi-Fi 802.11 b/g/n and Bluetooth 4.2 Power supply: 5 V via USB-C Dimensions: 70 × 54 mm Temperature range: −20 °C to 70 °C

Safety information

Power the development board only from a suitable 5 V USB power supply.

Do not use damaged USB cables, boards or connectors.

Keep the board away from liquids, conductive objects and metal surfaces.

Disconnect the power supply before connecting or disconnecting other components.

For use in dry indoor locations only.

SpacePC Airstation: ESP32-P4 touchscreen

Manufacturer: Waveshare International Limited Model: ESP32-P4-WIFI6-Touch-LCD-4.3, standard version without camera Product type: ESP32-P4 development board with capacitive touchscreen Display: 4.3-inch IPS, 480 × 800 pixels Touch: capacitive, up to five touch points Display interface: 2-lane MIPI-DSI Display controller: ST7701 Wireless module: ESP32-C6-MINI-1 with 2.4 GHz Wi-Fi 6 and Bluetooth 5 LE Power and programming: USB-C Manufacturer information: https://www.waveshare.com/esp32-p4-wifi6-touch-lcd-4.3.htm

Safety information

Use only a suitable USB power supply. Do not use damaged cables, boards or connectors.

Disconnect power before connecting or disconnecting the sensor. Protect the board and display from liquids, conductive objects, electrostatic discharge and mechanical pressure.

For dry indoor locations only. Do not cover the Airstation enclosure vents.

SpacePC Airstation: air-quality sensor

Manufacturer: Sensirion AG Model: SEN66 Product type: Multi-parameter air-quality sensor Measurements: PM1, PM2.5, PM4, PM10, temperature, relative humidity, VOC Index, NOx Index and CO₂ Particulate-matter range: 0 to 1,000 µg/m³ CO₂ output range: 0 to 40,000 ppm Interface: I²C Supply voltage: 3.15 to 3.6 V Dimensions: 55.2 × 25.6 × 21.3 mm Manufacturer information: https://sensirion.com/products/catalog/SEN66

Safety information

Operate the sensor only within its documented electrical limits. Connect or disconnect power and I²C lines only while power is removed.

Do not obstruct the air inlet or outlet. Do not clean the sensor with water, alcohol, cleaning agents or compressed air. Use in dry indoor locations only.

The Airstation is not a calibrated safety, smoke, fire or gas alarm.

General hardware bundle information

The hardware is supplied as a development and DIY component bundle for building documented SpacePC projects.

Use the components only in accordance with the supplied assembly, connection and setup instructions.

A printed enclosure is included only when explicitly stated on the relevant product page.

Do not remove, alter or cover model designations or manufacturer markings on the components.